Conductivity Sensor
TDS6012 Conductivity sensor
Features
- Range: 0.01 electrode: 0.02～20.00us/cm
- 0.1 electrode: 0.2～200.0us/cm
- 1.0 electrode: 2～2000us/cm
- 10.0 electrode: 0.02～20ms/cm
WK-TDS-6012 Multiple features in one: Wellkonix Conductivity Sensor EC/TDS measurement capabilities to achieve two in one, cost-effective integrated design to support boiler water, RO water treatment, sewage treatment, pharmaceutical industry, and other liquid measurement and monitoring.
How does a Wellkonix Conductivity Sensor work?
A conductance of a solution can be measured by applying an alternating electrical current to the two electrodes present in the probe. While this electrical current is applied to the solution, the cations (ions with a + charge) move to the negative electrode and the anions (ions with a – charge) move to the positive electrode. This movement of the ions leads to the solution to be conductive .An electrical conductivity meter (EC meter) measures the electrical conductivity in a solution. It has multiple applications in research and engineering, with common usage in hydroponics, aquaculture, aquaponics, and freshwater systems to monitor the amount of nutrients, salts or impurities in the water.
Technical Specification
Technical Specification
Product
TDS sensor, EC sensor, Resistivity sensor
Model
WK-TDS6012
Measure range
0.01 electrode: 0~20us/cm
0.1 electrode: 0~200us/cm
1.0 electrode: 0~2000us/cm
10.0 electrode: 0~2000us/cm
30.0 electrode: 30~600us/cm
Accuracy
±1%FS
Thread
NPT 1/2 、 NPT 3/4
Pressure
4 bar
Material
Stainless steel
Temp compensation
NTC10K / PT1000 optional
Temperature range
0-60℃
Temperature accuracy
±3℃
Ingress protection
IP68
Sensors
Features
Compact structure and easy installation
Isolated power supply design, data
stability, strong anti-interference ability
automatic/manual temperature
compensation
Automatically detect whether the
temperature probe is disconnected or
faulty, then switch to manual
temperature compensation
Support USA/NIST/custom pH calibration
solution, and user-defined ORP standard
solution
Communication: RS485 interface*1
(Modbus RTU protocol)
WKP100 is a digital sensor with RS485 designed by our company for the aquiculture industry, which can be used to measure the change of pH/ORP value in an aqueous solution system within the range. The sensor with a standard RS485 MODBUS-RTU protocol interface, which can be connected with the host computer conducts remote communication Each sensor is manufactured with our patented Axial Ion Path® reference technology, proprietary Low-Noise & High Temp Signal Cable along with proprietary ruggedized, high temp and coat resistant glass formulations. A wide silicon of sensor body styles and process findings in a variety of corrosion resistant materials allow direct placement of short-lived OEM pH/ORP sensors. WKP100 Performance Series sensors are compatible with all major manufacturers of pH analyzers and transmitters. Upgrade your analytical measurement without the hassle and expense of replacing costly fielding instruments. A wide selection of sensor body styles and process findings in a variety of corrosion resistant materials allow direct replacement of short-lived OEM
pH/ORP sensors. WKP100 Performance Series sensors are compable with all major manufacturers of pH analyzers and transmiers.